It's just a very delicate tool, aiming straight at a bullet hole and holding the laser on for just long enough will fix it, a moment longer and it could A: Cause more fires, and or B: Cause another, tougher hole.
| RuneStorm http://www.runestorm.com/forums/ |
|
| Greenlit levels Welder issue http://www.runestorm.com/forums/viewtopic.php?f=113&t=78308 |
Page 1 of 1 |
| Author: | Sooshie [ Mon Apr 07, 2014 9:43 pm ] |
| Post subject: | Greenlit levels Welder issue |
So I got the green lit version of the game. Loved it right up until I had to patch some bullet holes. Every time I try to do that a small fire breaks out. Even when I'm spot on where I should be. What gives? Is this a bug or what? |
|
| Author: | Black Eagle [ Tue Apr 08, 2014 4:56 am ] |
| Post subject: | Re: Greenlit levels Welder issue |
It's just a very delicate tool, aiming straight at a bullet hole and holding the laser on for just long enough will fix it, a moment longer and it could A: Cause more fires, and or B: Cause another, tougher hole.
|
|
| Author: | Lenney [ Tue Apr 08, 2014 5:01 am ] |
| Post subject: | Re: Greenlit levels Welder issue |
Black Eagle wrote: It's just a very delicate tool, aiming straight at a bullet hole and holding the laser on for just long enough will fix it, a moment longer and it could A: Cause more fires, and or B: Cause another, tougher hole. How do you fix the "tougher hole"? I thought it was just bugged out so I used the console command in the FAQ to remove it. lol |
|
| Author: | Black Eagle [ Tue Apr 08, 2014 5:11 am ] |
| Post subject: | Re: Greenlit levels Welder issue |
The tougher holes can also be patched using the welder. Only, it has even less time before the fires come! Which means that there is a fair margin for the smaller holes, but one does have to give the weapon about half a second or so to recover after you patch each hole, otherwise it gets too hot. 
|
|
| Author: | Lenney [ Tue Apr 08, 2014 5:21 am ] |
| Post subject: | Re: Greenlit levels Welder issue |
Black Eagle wrote: The tougher holes can also be patched using the welder. Only, it has even less time before the fires come! Which means that there is a fair margin for the smaller holes, but one does have to give the weapon about half a second or so to recover after you patch each hole, otherwise it gets too hot. Ah, I see. Any thought to adding fire extinguishers and really making fire interesting? lol |
|
| Author: | Black Eagle [ Wed Apr 09, 2014 4:02 am ] |
| Post subject: | Re: Greenlit levels Welder issue |
Certainly. Just one of many features we'd like to see, but may never actually see. 
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|